Verify that there are no new error codes
After correcting the issue, reopen the Error Log and verify that there are no remaining active
error codes. This will verify that the original error codes are not recurring and that there are
no new error code issues. If the error code is recurring, the issue may be mileage related,
review the error code odometer history to verify if the error event is related to mileage inter-
vals.
Clear the Error Log, see "Error Log & CPA Event Log" on page230.
Note:If there is no logged error codes and the issue persists, you will need to use
observable and audible indicators to identify the source of the failure. Also make
sure that there are no related service bulletins that may resolve the issue. Browse
the list of available Troubleshooting procedures for related Troubleshooting
information.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 226
7 Troubleshooting
Basic Troubleshooting Steps
To Next Page
Loading...
Need help?
General