Precor Experience 700 Series - Drive Roller Replacement; About; Procedure; Legacy Frame Drive Roller Replacement

Drive Roller Replacement
About
This procedure provides instruction to remove and replace the Drive Roller for both the leg-
acy and common frame weldment machines
Note:Common & Legacy Frame information, see TRM600/700/800 Common
Frame Overview.
Procedure
There are separate procedures for the legacy and common frame machines:
l Legacy Frame, see "Legacy Frame Drive Roller Replacement" below
l Common Frame, see "Common Frame Drive Roller Replacement" on page174
Legacy Frame Drive Roller Replacement
Review entire procedure before starting.
Removal
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 168
6 Replacement Procedures
Drive Roller Replacement