For cover removal and installation, see "Covers and Panels Replacement" on page86.
Tools and Supplies
Tools and supplies required to complete the machine service and repair.
Tools
• US and Metric Hex Key set • Standard straight slot tip screw drive set
• US and Metric socket set • Philips tip screwdriver set
• Us and Metric wrench set • US & metric Allen wrench set
• Cutters • 7/16” Allen key, socket mounted
• Rubber mallet • Pliers
• Tape measure /Straight edge ruler • Inner and outer snap ring pliers
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 11
2 General Information
Tools and Supplies
To Next Page
Loading...
