CLUB SETTINGS DESCRIPTION
REMOTE SPEED
CONTROL
Not used.
AUTO STOP
CONFIGURE
Automatically stops the machine if an exerciser is not detected.
Sets Auto Stop to On or Off.
Default: ON
MAINT CONFIG
(1)
(ASL equipped models only)
Enable/disable the ASL pulsing blue light maintenance counter
reminder function:
l ON - Enable
l OFF - Disable
SET CUSTOM
PROGRAM 1/2
Sets the use of a customized workout program.
Range: ON/OFF
Default: OFF
Note: The Total Body Workout can only be turned on in this Club
Settings menu.
(1)Only used on products that have the ASLfeature. Not included on the EFX600 series,
the TRM600 series, or the TRM800-10
1
(TRM10
2
/GEN06) series products.
(2)Custom option not included on all consoles.
Information Display (65)
Service Access Code: 65 (see "Service Menu Access Codes" on page28)
Provides the equipment usage, hardware, software, error code, and maintenance inform-
ation.
INFORMATION DISPLAY DESCRIPTION
ODOMETER
The total number of accumulated miles on the unit.
This value is stored in the upper PCA
3
in the console so
if the PCA is replaced the accumulated miles would start
again from "0".
HOUR METER
The total number of hours that the unit took to accu-
mulate unit miles.
This value is stored in the upper PCA in the console so if
1
TRM800 version 1 treadmills mfg. dates 2010 thru 2014.
2
TRM800 version 1 treadmills mfg. dates 2010 thru 2014.
3
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 41
4 Standard Service Menus
LED Console Standard Service Menus
To Next Page
Loading...
Need help?
General