The TRM600 common frame running belt and deck are unique to the TRM600. The
TRM600 belt/deck is not compatible with the TRM700 or TRM800 common frame tread-
mills. The running belt length is shorter due the smaller diameter drive and take-up rollers.
Also the deck includes a rear belt alignment tracker.
.
TRM700/800 Running Deck
There is a new TRM700/800 common frame deck that is not backward compatible with the
legacy frame. The common frame deck is approximately 1” larger in length and width than
the legacy frame deck. The TRM700/800 common frame deck is not compatible with the
TRM600.
There are no changes to the running belt parts. The larger common frame deck uses the
same running belt as the smaller size legacy frame deck. The Forbo belt with a pre-waxed
deck or the Ammeraal Beltech belt with a no wax deck.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 291
9 Theory of Operation
TRM600/700/800 Common Frame Overview
To Next Page
Loading...
Need help?
General