EasyManuals Logo

Precor Experience 700 Series User Manual

Precor Experience 700 Series
339 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
MAINTENANCE
MENU
(1)
DESCRIPTION
Recommended
Action menu
(1)
menu: Maintenance > Recommended Action
Range: None, Inspect
l None: No maintenance required.
l Inspect:Maintenance action required.
Used to report that there is a maintenance issue that requires
attention; it could indicate routine maintenance is due or that a
machine failure (error code) has occurred that required atten-
tion.
» Operating Condi-
tion
(1)
menu: Maintenance > Operating Condition
Range: Normal, Inspect
l Normal: No maintenance required.
l Inspect: There is a routine maintenance issue or failure
condition (error code) that requires immediate attention.
.Important:Reset the ASL light state and Motor Controller
(MC) status light after repairs a completed.
» Belt Rating
(1)
(Treadmills only, not supported on TRM600)
menu: Maintenance > Belt Rating
Range: 10 - 0 (10 - New condition, ≤ 1 - Replace running belt)
(ASL equipped products only)
A belt rating of 0 or 1 will cause a blue pulsing ASL light indic-
ating that there is a problem with the running belt/deck and
requires servicing or replacement.
Important:Reset the Belt Rating after replacing with a new run-
ning belt and deck (select Replace).
» Next Maintenance
Due
(1)
menu: Maintenance > Next Maintenance Due
Provides machine next maintenance due remaining mileage or
hours. Perform preventative maintenance when the main-
tenance counter reaches 0.
Important:Reset the maintenance interval after completing
routine maintenance service, (select Reset). Treadmills reset to
1000 miles, ellipticals reset to 250 Hrs.
Active Status Light
(ASL menu)
(1)
menu: Maintenance > Active Status Light
Indicates the machine operating and maintenance status.
Blue Solid: Normal operation Indicates that the ASL has not
detected any logged error codes.
Blue Pulsing: Preventative maintenance reminder.
• Treadmills: A belt rating of 0 or 1 will cause a blue pulsing
ASL light indicating that there is a problem with the running belt/-
deck and is in need of servicing or replacement.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 48
4 Standard Service Menus
Touchscreen Console Standard Service Menus

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Precor Experience 700 Series and is the answer not in the manual?

Precor Experience 700 Series Specifications

General IconGeneral
BrandPrecor
ModelExperience 700 Series
CategoryTreadmill
LanguageEnglish

Related product manuals