TECHNICAL INFORMATION
MAIN
CODE
SUB
CODE
DESCRIPTION
CHECK
TRANS
LIGHT
INHIBITED OPERATION
DESCRIPTION
25 33
Output speed sensor detected at 0
speed (3rd)
Yes
(1)
DNS, lock in current range
(3rd), DNA
25 44
Output speed sensor detected at 0
speed (4th)
Yes
(1)
DNS, lock in current range
(4th), DNA
25 55
Output speed sensor detected at 0
speed (5th)
Yes
(1)
DNS, lock in current range
(5th), DNA
25 66
Output speed sensor detected at 0
speed (6th)
Yes
(1)
DNS, lock in current range
(6th), DNA
25 77
Output speed sensor detected at 0
speed (R)
Yes
(1)
DNS, lock in current range
(R), DNA
26 00 Throttle source not detected No
Use throttle default values,
DNA
26 11 Engine coolant source not detected No Use default value of 0°F
32 0 C3 pressure switch open, Low range Yes
DNS, lock in current range
(Low), DNA
32 33 C3 pressure switch open, 3rd range Yes
DNS, lock in current range
(3rd), DNA
32 55 C3 pressure switch open, 5th range Yes
DNS, lock in current range
(5th), DNA
32 77
C3 pressure switch open, Reverse
range
Yes
DNS, lock in current range
(R), DNA
33 12
Sump oil temperature sensor failed
low
No
Use default value of 200°F
(93°C)
33 23
Sump oil temperature sensor, failed
high
No
Use default value of 200°F
(93°C)
34 12
Factory calibration compatibility
number wrong
Yes
DNS, SOL OFF (Hydraulic
default), DNA
34 13 Factory calibration block checksum Yes
DNS, SOL OFF
(Hydraulic default), DNA
34 14 Power off block checksum No
Use previous location or
factory calibration and reset
adaptive, DNA
34 15 Diagnostic queue block checksum No
Use previous location or clear
diagnostic queue, DNA
34 16 Real time block checksum Yes
DNS, SOL OFF
(Hydraulic default), DNA
34 17
Customer modifiable constants
checksum
Yes
DNS, SOL OFF
(Hydraulic default), DNA
35 0
Power interruption (code set after
power restored)
No
None (Hydraulic default
during interruption)
8-11