CONTROLS AND INSTRUMENTS
L.H. DASHBOARD PANEL
L.H. DASHBOARD PANEL 06347
The dashboard is designed with driver-exclusive
controls at the left side, and controls shareable
with travel companions at the right side.
R.H. DASHBOARD PANEL
R.H. DASHBOARD PANEL 06376
The HVAC control module as well as the cluster
dimmer switch, miscellaneous control switches
and air vents. are located in the R.H. dashboard
panel.
CONTROL SWITCHES
High quality laser-engraved switches are used to
control many of the features of the vehicle. Many
switches have an embedded witness LED to
inform the driver at a glance which features are
active. Some switches' LED will turn OFF after a
short while when the engine is running. This is
normal and is designed to reduce glare when
driving. The functions still operate even if the LED
is OFF. If the switches are still ON when the
engine is turned OFF, the LEDs will illuminate to
warn the driver to turn them OFF. Switches are
described in the order they appear, from left to
right, top to bottom.
Headlights
Push down rocker switch to the
first position to activate
clearance, tail and marker lights.
Push down fully to turn ON both
the clearance and marker lights
and the headlights. The controls
and instrument lights will
illuminate.
Note:
Daytime running lights will be
automatically cancelled when the exterior
lighting switch is fully depressed.
Fog Lights
Optional halogen f
provide better visibility in fog and
precipitation. They improve
close range visibility and provide
protective covers from fog lights
before use.
Warning: Turn OFF engine and apply parking
brake before removing fog light covers.
Note:
Some states and provinces restrict the
use of fog lights. Verify local state or provincial
regulations before using.
3-8
To Next Page
Loading...
Need help?
General
