EasyManuals Logo

PREVOST XL2 User Manual

PREVOST XL2
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
OTHER FEATURES
If the entered password is correct, the MCD will
revert to the previous screen. Access to
restricted screens is allowed.
06402
Changing passwords
To change any password, owner’s password
must be entered first.
To change passwords:
1. Using the arrow keys, highlight SET UP
MODE;
2. Press enter key to confirm;
3. Using the arrow keys, highlight PASSWORD
CONFIG;
4. Press enter key to confirm;
5. Using the arrow keys, select MECHANIC or
OWNER;
6. Press enter key to confirm;
7. Set new password.
PRODRIVER™
PRODRIVER™ is an optional graphic device
similar to MCD but with added features. A
summary of data displays available from
PRODRIVER™ include:
Instantaneous and average fuel
consumption rate;
Trip time, miles driven, fuel used, , average
speed;
Driving time, percentage, miles, fuel used,
fuel consumption rate;
Idle time, percentage and fuel used;
Cruise time, percentage, miles cruised, fuel
used, fuel consumption rate;
Top gear time, percentage, miles driven, fuel
used, fuel consumption rate;
Overspeed time and percentage for two
speed thresholds;
Over-rev time and percentage;
Maximum vehicle speed and RPM;
Coasting time and percentage;
Automated oil change interval tracking;
Hard braking incident record;
Driver initiated incident record;
Stop Engine and Check Engine code log.
PRODRIVER™ has many additional features
and benefits and can be combined with other
members of Data Hub line of products from
Detroit Diesel. This combination presents a
powerful vehicle information management
system.
WORLD TRANSMISSION
ELECTRONIC CONTROL UNIT (ECU)
Works with the automatic transmission with the
push-button shift selector.
The World Transmission electronic controls has
four major elements: The Electronic Control Unit
(ECU), the Throttle Position Sensor (TPS),
speed sensors and the transmission shift
selector control pad. Refer to "Controls &
Instruments" chapter 3. These components work
together to electronically control the functions of
the transmission. The throttle sensor, speed
sensors and shift selector transmit information to
the ECU. The ECU processes this information
and then sends signals to actuate specific
solenoids located on the control valve body in
the transmission. The action of the solenoids
affects hydraulic circuits, which in turn control
the upshifts, downshifts, and lock-up functions.
In addition to controlling the operation of the
transmission, the WT electronic controls monitor
the system for abnormal conditions.
When one of these conditions is detected, the
WT electronic control system is programmed to
automatically respond in a manner which is safe
for the driver, the vehicle and the transmission.
The WT electronic control system turns ON the
CHECK TRANS light on the dashboard, which
serves as a fault indicator.
To enhance troubleshooting and to allow
interrogation of the ECU for valuable service
information, the shift selector display on the
transmission control pad or an optional
diagnostic tool can be used. For information
about reading and interpreting diagnostic codes,
4-10

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PREVOST XL2 and is the answer not in the manual?

PREVOST XL2 Specifications

General IconGeneral
BrandPREVOST
ModelXL2
CategoryMotorhomes
LanguageEnglish

Related product manuals