EasyManuals Logo

PREVOST XL2 User Manual

PREVOST XL2
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
CONTROLS AND INSTRUMENTS
HVAC CONTROL UNIT
22184
The vehicle is slightly pressurized by the central
HVAC system to prevent dust and moisture from
entering. Air flow and controls divide the vehicle
into two areas: driver’s area with defroster and
cabin area.
Fresh air is fed in each area and has a separate
return air and discharge air duct.
Warning: Warm temperatures may cause
drowsiness and affect alertness while driving. For
optimum driving conditions, keep temperature
between 68°F and 72°F (20°C to 22°C).
Note: To operate the air conditioning system
when stationary, run engine at fast idle. When the
A/C system is running, keep windows and door
closed.
To prevent battery run-down, the A/C and heating
systems will not operate if the charging system is
not working properly.
When the A/C system is running, park at least 4
feet (1,5 m) from other vehicles or buildings to
allow sufficient air flow through the condenser
core.
Separate driver and cabin heating, ventilation and
air conditioning controls are located on this panel.
To operate, the vehicle’s engine must be running.
The driver’s or the cabin’s units may be turned
ON by pressing
or or buttons.
All parameters set before turning the system OFF
will be kept in memory for the next power ON.
The HVAC module performs a self diagnosis
every time it is turned ON. Codes are shown on
displays or flashed on control buttons. Refer to
"Maintenance Manual" for more information on
the diagnostic codes.
Heating Mode Indicator
22135
Illuminates when system is heating.
Cooling Mode Indicator
22134
Illuminates when system is cooling.
Fan Speed
22135
The driver’s fan has six speeds.
Increase speed by pressing on the
upper portion of the button,
decrease by pressing on the lower
portion.
Temperature Set Button
22132
The driver’s side and the
cabin’s side have independent
temperature controls. To
increase the temperature, press
on the " +
" sign, to decrease
the temperature, press on the
" - " sign. Temperature range is
between 55°F and 85°F (12°C
to 28°C).
A/C Button
06385
Engages the A/C compressor.
Windshield Defogger
22139
Air is sent towards windshield when
activated.
All Vents Open
22140
Air is sent to defogger vents as well as
panel and footwell registers.
Panel And Footwell
22137
Air is sent to panel and footwell
registers only.
Panel
22136
Air is sent to panel registers only.
Temperature Degree Selector
22133
Toggles between Fahrenheit and
Celsius units (Driver’s HVAC unit must
be turned ON).
3-12

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PREVOST XL2 and is the answer not in the manual?

PREVOST XL2 Specifications

General IconGeneral
BrandPREVOST
ModelXL2
CategoryMotorhomes
LanguageEnglish

Related product manuals