3270 Params
127
Format Control
Enables the printer to reflect the same spacing as CTPC model printers after
absolute and relative move commands are executed.
• Disable (default). Reflects distance, generated by the VGL feature, PGL
feature, and Hex Transparent control code sequence, in the new position
(after horizontal and vertical tabs are executed).
• Enable.
Max. Print Width
Set the maximum print width the printer will print when using a C/T host
interface. Set for 13.2 inches when printing files larger than the width of the
printer. All data exceeding the width of the maximum Printer Width will be
truncated.
• 13.2 inches (default)
• Printer Width (the maximum width of the printer)
To Next Page