Pro-Tech BE-0986 - Page 14

Chapter 2 Getting Started
BE-0986 SERIES USER MANUAL
Page: 2-5
Battery
 2-pin wafer
 Supports battery voltage monitoring
 Can be still boot-up no matter when battery voltage is
too low or no battery
Software Support
 Hardware Monitor API/utility (for Temp)
 WatchDog API
 FAN (4 pins) Smart FAN & Manual mode speed control
by API / utility / BIOS
 I2C (read/write) API/utility
 GPIO setting API/utility
 Panel Backlight Brightness Control API /utility
 Panel Backlight ON-OFF Control API / utility
OS: Win10 64bit
 Supports fTPM function which can be enabled by BIOS
(default: Disabled)
Environment
EMC & Safety
 CE / FCC
Operating Temp.
 BE-0986RA-D0N: 0°C ~ 60°C (with heatsink)
 BE-0986RA-N0N: without heatsink
 BE-0986RA-D1N: 0°C ~ 60°C (with heatsink)
 BE-0986RA-N1N: without heatsink
Storage Temp.
 -40°C ~ 85°C
Humidity
 20%~ 95%