User Manual
112
Figure'9.26'Configure'Multicast'
4. Click the Apply button to save and exit the interface.
8.2.8!Conf igur ing!R T SP !
Purpose:
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in entertainment
and communications systems to control streaming media servers.
Steps:
1. Enter the Network Settings menu by clicking Menu > Configuration > Network.
2. Select the More Settings tab to enter the More Settings men.
Figure'9.27'RTSP'Settings'Interface
3. Enter the RTSP port in the text field of RTSP Service Port. The default RTSP port is 554, and you
can change it according to different requirements.
4. Click the Apply button to save and exit the menu.
8.2.9!Conf igur ing!S e rve r !an d!H TT P !P orts !
Purpose:
You can change the server and HTTP ports in the Network Settings menu. The default server port is 8000 and
the default HTTP port is 80.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings interface.
3. Enter new Server Port and HTTP Port.
To Next Page
Loading...