User Manual
42
Figure'4.12'PTZ['Calling'Pattern'
Call pattern in live view mode.
Steps:
1. In the live view mode, press PTZ control on the IR remote control, or click PTZ Control icon on the
quick setting toolbar.
2. And then choose Pattern on the control bar.
3. Double click the pattern number you want to call, or you can select the pattern number and click to
call the pattern.
Figure'4.13'PTZ'Toolbar['Pattern!
3.3 PTZ Control Toolbar
In the Live View mode, you can press the PTZ Control button on the IR remote control, or choose the PTZ
Control icon to enter the PTZ toolbar.
To Next Page
Loading...