User Manual
123
9.1 Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your device.!
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
Figure'10.1'HDD'Inform ation'Interface'
!
2. Select the HDD to be initialized.
3. Click the Init button.
Figure'10.2'Confirm'Initialization'
!
4. Select the OK button to start initialization.
5. After the HDD has been initialized, the status of the HDD will change from Uninitialized to Normal.
Figure'10.3'HDD'Status'Changes'to'Normal'
!
Note: Initializing the HDD will erase all data on it.
To Next Page
Loading...