Pulseroller ConveyLinx-IO - Page 53

53
EasyRoll Software Configuration Tool
Publication ERSC-1008 Rev 1.1 – October 2017
In this example, we
clicked “Upload ALL” so
the selected firmware
upgrade file will be sent
to all 4 Nodes. The
“Output” window will
update the progress of
the file uploading process.
The time it takes for this
process will vary
depending upon how
many Nodes are being
uploaded.
When all Nodes report
back to the “Output”
window with a status of
Done; then the upload is
complete and you can
close the ConveyLinx
Advanced Dialog window.