QSC TouchMix Series User Manual

101
1001108-01-F
DAW – R / P (TM- P )
Record to and Playback from a Digital Audio Workstation.
IMPORTANT!: The
TouchMix-30 Pro is capable of 32 x 32
channel USB audio interface to Windows
and macOS computers. Windows
interface requires a driver available for
download from QSC. No driver is
required for macOS operation.
1. Track button – Touch the Track button to
select a DAW track as the source for the channel.
2. DAW – Indicates if the mixer is receiving
audio from the DAW (Connected) or not (Not
Receiving Audio).
3. Sample Rate switch – Switches the
mixers sample rate between 44.1 kHz and 48
kHz. The mixer must be the sample rate clock
master.
4. Recording Mode button – Touch this
to change the Recording Mode to MP3 Playback
or MultitrackUSB.
5. Channel Activity – Lights to indicate
audio is being received from the DAW on that
channel.
NOTE: To manage connections on the Mac – Open “Audio MIDI Setup” and select “QSC TM30 Pro.
Press
Rec/Play
Touch
Recording
Mode
Touch
Multitrack
DAW
Rec/
Play
Recording
Mode
Multitrack
DAW

QSC TouchMix Series Specifications

General

Touchscreen	Yes
Type	Digital Mixer
Wireless Control	Yes (via Wi-Fi)
Model Variants	TouchMix-8, TouchMix-16
Inputs	Varies by model
Outputs	Varies by model
Built-in Effects	Yes
USB Recording	Yes
Wi-Fi Control	Yes
Channels	Varies by model
EQ Bands	4-band parametric EQ
Software Control	Yes
Phantom Power	Yes
Aux Sends	Varies by model
Compression	Yes
Gate	Yes
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model