QuadTech 1730T User Manual

Interface 150821/A4 Page 87 of 110
3.1.5.32 [:SENSe]:FUNCtion[:ON]
Instruction: [:SENSe]:FUNCtion[:ON]
Parameter: {FIMPedance⏐FADMITTANCE}
Return Value: {FIMPedance⏐FADMITTANCE}
Function: Set or query the equivalent circuit measurement mode.
Description: FIMPedance Series equivalent circuit
FADMittance Parallel equivalent circuit
3.1.5.33 [:SENSe]:FUNCtion:CONCurrent
Instruction: [:SENSe]:FUNCtion:CONCurrent
Parameter: {ON⏐OFF ⏐1⏐0}
Return Value: {1⏐0}
Function: Set or query the transformer measurement mode (DCR, L2, N, M and R2).
Description: ON (1) Transformer mode ON
OFF (0) Transformer mode OFF
Note: The instructions: [:SENSe]:FUNCtion[:ON] and CALCulate{1⏐2}:FORMat must be used
with the [:SENSe]:FUNCtion:CONCurrent instruction.
When the SENSe:FUNCtion:CONCurrent is OFF:
<SENSOR_FUNCTION> Measurement Function
“FIMPedance” Impedance measurement – Series equivalent circuit
“FADMittance” Admittance measurement – Parallel equivalent circuit
When the SENSe:FUNCtion:CONCurrent is ON:
“FIMPedance”, “FRESistance” DCR measurement – Series equivalent circuit
“FADMittance”, “FRESistance” DCR measurement – Parallel equivalent circuit
“VOLTage:AC”, “IMPedance Transformer Turns Ratio (N) measurement
“IMPedance”, “FADMittance” Transformer Mutual Inductance (M) measurement
“IMPedance”, “RESistance” Transformer DC Resistance (R2) measurement
Parameter SENS:FUNC:ON CALC1:FORM CALC2:FORM
Z – θ
R – X
“FIMPedance”
MLINear
REAL
PHASe
IMAGinary
Cp – D
Cp – Q
Cp – Rp
“FADMittance” CP
D
Q
Rp
Cs – D
Cs – Q
Cs – Rs
“FIMPedance” CS
D
Q
REAL
Lp – D
Lp – Q
Lp – Rp
“FADMittance” LP
D
Q
REAL
Ls – DCR
Lp – DCR
“FIMPedance”, “FRESistance”
“FADMittance”, “FRESistance”
LS
LP
REAL
REAL
L2 – N
L2 – 1/N
L2 – M
L2 – R2
“FIMPedance”, “VOLTage:AC”
“FIMPedance”, “VOLTage:AC”
“FIMPedance”, “FADMittance”
“FIMPedance”, “FADMittance”
LS
REAL
INV
LP
REAL

QuadTech 1730T Specifications

General

Brand	QuadTech
Model	1730T
Category	Measuring Instruments
Language	English