Page 68 of 76 Interface
3.2.5.33 WVT:MEAS:TE?
Instruction: WVT:MEAS:TE?
Parameter: None
Return Value: {Measurement Time} in <NR3> format
Function: Query the total Measurement Time of the WV Test (Tr + Test Time).
Description: <numeric value> 30 – 600seconds
3.2.5.34 TRIG[:IMM]
Instruction: TRIG[:IMM]
Parameter: None
Return Value: None
Function: Initiate the Trigger function.
3.2.5.35 TRIG:SOUR
Instruction: TRIG:SOUR
Parameter: {BUS⏐EXT⏐INT⏐MAN}
Return Value: {BUS⏐EXT⏐INT⏐MAN}
Function: Set or query the trigger mode.
Description: BUS Bus trigger
EXTernal External trigger
INTernal Internal trigger
MANual Manual trigger
3.2.5.36 TRIG:DEL
Instruction: TRIG:DEL
Parameter: {<numeric value>⏐MIN⏐MAX}
Unit: milliseconds
Return Value: {Trigger Delay Time} in <NR3> format
Function: Set or query the trigger delay time.
Description: <numeric value> 0 – 9999milliseconds
MIN 0milliseconds
MAX 9999milliseconds
3.2.5.37 TRIG:EDGE
Instruction: TRIG:EDGE
Parameter: {FALL⏐RISI}
Return Value: {FALL⏐RISI}
Function: Set or query the edge on which to initiate the trigger.
Description: FALL Measurement is triggered on falling edge
RISI Measurement is triggered on rising edge
To Next Page
Loading...
