47
Flight Operation
7
Orientation during GNSS denied mode
It is possible to navigate via the sensor screen and via optical orientation during the GNSS denied mode.
1. Within the sensor screen in QBase select a landmark and select a geolock at this location.
2. The chosen location will come up in the map screen as well. This location will match with the location where the geolock
was set but not with the correct location with respect to the absolute coordinates.
3. Now select a yTo on the geolocked location via the map screen.
4. The UAV will y to the location that was chosen via the sensor screen previously. Please be aware that this position does not
correlate with the correct absolute position.
5. Please continue with this procedure to safely navigate via the sensor screen.
To Next Page
Loading...