31
6
6.3 Vector
Lock Mechanism
All connections between the UAV parts are secured by the Vector/Scorpion lock mechanism. When connecting please make
sure that the lock mechanism is in place.
closed open open open openclosed
1. Open the connector by gently pushing the shown button.
2. Connect the two parts and insert the connection hook into the corresponding mount.
3. Secure the connection by locking the mechanism. An audible click is noteable when the mechanism is in place.
Assemble/Disassemble
Backpack Middle Layer
Place the main body on a level and stable surface.
Attach the rear fuselage.
Attach the payload.
Attach the airspeedsensor.
Backpack Top Layer
Attach the left inner- and outer-wing.
Backpack Bottom Layer
Attach the right inner- and outer-wing.
Attach the elevator.
Remove the battery cover.
Press the Start Button of the Smart Battery Pack. Insert the battery and attach the cover to secure the batteries.
The Vector will power automatically.
To Next Page
Loading...