- 24 -
14.2. USB A Port
USB port of type A is intended for:
• Connecting a USB flash drive in order to enable:
- operator's parameters export/import,
- weighing reports export,
- Alibi reports export.
• Connecting scale to PCL printer.
• Connecting EPSON TM-T20 printer (featuring USB port).
The USB flash drive must support FAT files system.
14.3. USB B Port
USB port of type B is intended for connecting the scale to a computer. In order
to make connection of scale and computer possible, it is necessary to install
virtual COM port in a computer. To carry out this procedure, you need a
respective driver installer which may be either downloaded from
www.radwag.pl
website or taken from a CD with manuals: RADWAG USB
DRIVER x.x.x.exe.
Procedure:
1. Run the driver installer and follow the commands.
Select language version and
press „OK” button for
confirmation.
In order to continue press
„Next” button.
To Next Page
Loading...
