RADWAG WTC 2000

- 32 -
Procedure:
• Enter <P7.Othr> submenu and change the settings. Refer to the below
table:
Parameter Description
<7.4.SdAt>
Enter this parameter to set current date, where the date format is
YYYY.MM.DD*.
<7.5.Stnn>
Enter this parameter to set current time, where the time format is
24H**.
<7.6.FdAt>
Enter this parameter to select date format. Available values: 1 -
DD.MM.YYYY, 2 - MM.DD.YYYY, 3 - YYYY.MM.DD* (set by
default), 4 - YYYY.DD.MM.
<7.7.Ftin>
Enter this parameter to select time format. Available values: 24H**
(set by default), 12H**.
*) - Date format: Y – year, M – month, D – day.
**) - Time format: 12H – 12-hour format, 24H - 24-hour format.
17.5. Default User Settings
Parameter allowing you to restore default operator settings.
Procedure:
• Enter <P7.Othr / 7.8.dFLu> submenu, text <Cont?> is displayed
(Continue?).
• Press
key to confirm. The process of restoring default settings starts,
this is signalled with display of 'dash', < - >.
• Upon process completion <7.8.dFLu> submenu is displayed. Go to home
screen.
18. SCALE DATA
Scale data menu, <P8.InFo>, provides information on the weighing device and
its program. The parameters serve informative purposes:
Parameter Description
<8.1.Idb>
Serial number of the scale.
<8.2.PurS>
Program version.
<8.4.PStP>
Settings printout. Enter the parameter to send scale settings to
printer port (all parameters).