- 31 -
nonE
Backlight off.
10
Display brightness low limit value in [%].
100
Display brightness high limit value in [%].
• Press key to confirm, next go to the home screen.
17.2. 'Beep' Sound
Parameter allowing you to enable/disable sound signal informing the operator
about pressing panel key(s).
Procedure:
• Enter <P7.Othr / 7.2.bEEP> submenu.
• Press
key, parameter values are displayed successively one by one:
no – sound signal disabled, YES - sound signal enabled.
• Press
key to confirm, next go to the home screen.
17.3. Automatic Shutdown
Parameter allowing you to set time interval, in [min], after which the weighing
device shuts down automatically. If the indication is stable during the declared
time interval, the device is shut down automatically. Shutdown function is
inactive and the device cannot be turned off if any process is started or if you
operate the menu.
Procedure:
• Enter <P7.Othr / 7.3.t1> submenu.
• Press
key, parameter values are displayed successively one by one:
nonE – function disabled, 1, 2, 3, 5, 10.
• Press
key to confirm, next go to the home screen.
17.4. Date and Time
Parameter allowing you to set current date and time and to specify date and
time format.
To Next Page
Loading...
