Current Section: Run Times 34
Navigation:
6. RUN TIMES
Run Times are the number of minutes (or hours and minutes) that each station runs.
Once your stations are set up, you can assign irrigation Run Times for each. Station Run Times are
particular to programs, so typically stations are set for a single program.
Copy
Station HH MM
PGM 01
001 00:00
1 Turn the controller dial to Run Times
2 At the Set Run Times screen, press the rst set of and keys to set the station to you
wish to create programs for.
•
If the desired program is not selected, press the Program Select Button to choose the desired program.
3 Press the second set of and keys to set the Station Run Time. Range can be from 00
hours, 00 minutes (no Run Time) up to 96:00 hours.
•
Press and HOLD keys to accelerate settings.
Use the Program Select Button to change the program and repeat this process to set up additional Station
Run Times for other programs as desired.
To Next Page
Loading...
Need help?
General
