Need help?Do you have a question about the Rain Bird ESP-LXIVM Series and is the answer not in the manual?
General| Voltage | 24 VAC |
|---|---|
| Type | Modular |
| Stations | 4, 8, 12, 16 |
| Mounting | Indoor/Outdoor |
| Watering Schedules | Flexible scheduling options |
| Station Run Time | 1 minute to 4 hours per station |
| User Interface | LCD display |
| Connectivity | Optional Wi-Fi or wired remote control |
| Surge Protection | Yes |
| Master Valve/Pump Start | Yes |
| Sensor Compatibility | Rain sensor, flow sensor |
| Sensor Input | Yes |
| Remote Control Compatibility | Yes (Optional) |
| Enclosure | Weather-resistant |
| Cycle + Soak | Yes |
| Backup Memory | Yes (Retains programs during power loss) |
| Number of Stations | 4 to 22 |
| Watering Days | Customizable by program |
| Number of Start Times | 6 |
| Start Times per Program | 4 |
Details on warnings, cautions, notices, and safety instructions.
Precautions for electrical connections, wiring, and appliance use.
Explanation of dial positions, display, and function buttons.
Steps for hardware setup, program configuration, and review.
How alarm conditions are indicated on the controller panel.
Table of common alarms and their potential causes.
Configuring master valves or pump start relays for the irrigation system.
Setting up flow sensors to alert on high/low rates and shut down stations.
Running a manual test on all stations to check functionality.
Reviewing a summary of run times, start times, and water days for all programs.
Tracking the volume of water flowing through the system with FloWatch.
Understanding FloZones and flow management features like Flo-Manager.
Automatically learning flow rates based on real usage.
Enabling Flo-Manager for hydraulic management and station prioritization.
Configuring FloWatch with flow rates and actions for high/low flow conditions.
Setting thresholds and settling times for high and low flow conditions.
Saving and restoring irrigation programs as backups.
Manually starting a single station for watering.
Instructions for mounting the controller and connecting wiring.
Steps for installation and list of included components.
Steps for connecting the 2-Wire communications cable to the controller.
Connecting power supply wires to the controller's transformer.
Installing and configuring a cartridge for communication with the IQ Central System.
Steps to install the NCC cartridge into the controller.
To Next Page
