44
ESP-LXIVM Series Controllers
Copy Run Times
You can copy Station Run Times from one program to other pro-
grams.
At the Set Run Times screen, press Copy.
At the Copy screen, use the <> key to navigate between the num-
ber setting fields. Press the + and – keys to set the desired starting
and ending station numbers. Press the ✔ key to copy the station
data, or press the ✖ key to cancel.
SET RUN TIMES
PGM 01
00:10001
Station
HH
MM
PGM 1
Copy Run Time:
to all stations between
002 003-
00:01
HH MM
A confirmation screen shows the process is complete.
PGM 1
Sta. 002 Through Sta.003
Copied 002