103
ESP-LXIVM Series Controllers
A confirmation screen shows the MV has closed.
The OFF dial position screen will now show the message “All MVs
Closed. To cancel and restore irrigation functions, turn the dial to
AUTO".
All MV Closed
disabled
All irrigation
Close MVs
To Cancel Turn Dial
To AUTO
All MVs
Closed
Turn Off 2-Wire path
Sometimes you may want to turn off the 2-Wire path, such as
when you’re maintaining your system. The ESP-LXIVM controller
lets you do this automatically so you do not need to un-wire the
2-Wire path from the connection lugs.
CAUTION
Always turn off 2-Wire path before maintaining hardware
connected to the 2-Wire path. The 2-Wire path is always pow-
ered even when irrigation is not scheduled.
NOTICE
Irrigation functions, including: flow sensors, weather sensors
and valves will be non-operational when the 2-Wire path is
powered down.
To Next Page
Loading...
