43
ESP-LXIVM Series Controllers
Set Station Run Times
Run Times are the number of minutes (or hours and minutes) that
each station runs.
Once your stations are set up, you can assign irrigation Run Times
for each. Station Run Times are particular to programs, so typically
stations are set for a single program.
Turn the controller dial to Run Times
At the Set Run Times screen, press the first set of + and – keys (1
and 2) to set the station to program.
NOTE: If the desired program is not selected, press the Program
Select button to choose the desired program. See "Program
Select Button" on page 41 for more details.
Press the second set of + and – keys (3 and 4) to set the Station
Run Time. Range can be from 00 hours, 00 minutes (no Run Time)
up to 96:00 hours.
• Press and HOLD keys to accelerate settings.
SET RUN TIMES
PGM 01
00:00001
Station
HH
MM
SET RUN TIMES
PGM 01
00:10001
Station
HH
MM
Change the Program Select switch and repeat this process to set
up additional Station Run Times for other programs as desired.
To Next Page
Loading...
Need help?
General
