95
ESP-LXIVM Series Controllers
Factory Defaults
Restore the ESP-LXIVM controller’s factory default settings.
Turn the controller dial to Advanced Settings
At the IQ / ADVANCED screen, press the Down Arrow key to select
Factory Defaults, then press Next.
At the confirmation screen, press and HOLD the Yes key for 4 sec-
onds to Restore Factory Defaults. If you’re not sure, press No.
IQ / ADVANCED
About this LX-IVM
Configure Cartridge
Factory Defaults
Store/Recall Programs
Restore Factory Default
Are you sure? Press and hold
Yes to proceed.
A confirmation screen shows the process is complete.
Restored Factory Defaults
NOTICE
Be very careful about using the Factory Default as an option
as all previous settings, including 2-Wire Device addresses,
will be permanently cleared from system memory. Consider
using the Clear All Programs option instead so that your
2-Wire Device addresses will not be erased.
To Next Page
Loading...
