21
ESP-LXIVM Series Controllers
AUTO > Alarm
Automatic Operation
AUTO is the normal operating mode.
Turn the controller dial to AUTO
The Auto screen shows the current day and time.
When a program is running in AUTO mode, the station number
will show on the screen. Press the + or – keys to add or subtract
minutes from the run time for the currently running station. To
advance to the next station in a program, press the Adv key.
Auto
13 Jan 2018
Sat 06:00 AM
PGM 1 Manual
HH:MM
00:20
Station 001
Alarms
An alarm condition can occur when programming omissions or
other issues prevent normal irrigation.
Alarm Detected
When an alarm condition is detected, the red alarm light on the
controller front panel will illuminate.
To Next Page
Loading...
