Rain Bird ESP-LXIVM Series - Fill out the Programming Guide; Storing the Programming Guide; ; L L Fill out Programming Guide

18
ESP-LXIVM Series Controllers
Fill Out the Programming Guide

Enter information about your system hardware and settings in
the appropriate fi elds on the Programming Guide.
9
ESP LX-IVM Controller
Station
No.
Station
Run Time
Station
Flow Rate
Station
Cycle Time
Station
Soak Time
Notes
1
2
3
4
5
6
7
8
9
10
11
12
10 min.
20 min.
52
26
5 min.
10 min.
30 min.
40 min.
ENTER INFO
Storing the Programming Guide

Return the Programming Guide to a permanent, safe location
when you’re fi nished working with it. We recommend hanging it
on the hook inside the controller cabinet door as shown below.
8
ESP LX-IVM Controller
Station
No.
Station 2-Wire Device
Address Label
Description Wire Path Station Uses
1
2
3
4
5
6
7
8
9
10
11
1
2
Entry sprays
Color beds
1
2
4
5 & 6
40005
40006

Remote Programming
The ESP-LXIVM controller can be programmed while operating under
battery power.
This feature is useful if the controller is installed in an area that is not
easily accessible. It also lets you enter program information before
installing the controller at the job site. See "Programming Under Bat-
tery Power" on page 115 for more details.