35
ESP-LXIVM Series Controllers
Copy Station To Station
This feature copies the Cycle+Soak™ Programming from one station
to other stations.
Turn the dial to 2-Wire Settings
At the Cycle+Soak screen, press the Copy key.
At the Copy screen, use the <> key to navigate between the num-
ber setting fields. Press the + and – keys to set the desired starting
and ending station numbers. Press the ✔ key to copy the station
data, or press the ✖ key to cancel.
Cycle & Soak
002
Station Cycle Soak
:10
Minutes
Copy
:20
Copy
10
Mins
to all stations between
003 005
20
Mins
Cycle Soak
A confirmation screen shows the process is complete.
Copied
Mins Mins
Cycle Soak
10 20