Current Section: Setup 23
Navigation:
Next
Master Valves
Weather Sensors
Station Setup
Flow Sensors
Advanced Station Settings
DoneNoYes
Local
N
STA 001
Assign Weather Sensors
1 Navigate to Weather Sensors on the Station Setup screen and press Next.
2 Use the Yes and No buttons to choose weather the current station should obey or ignore
weather sensor input.
3 With Yes Selected the currently station will obey the connected Weather Sensor. For
example if a Rain sensor is connected then the if the Rain Sensor detects Rain irrigation
will be prevented for the Station.
4 With No selected the current station will ignore the state of a connected weather sensor.
4.3.4 Valves Per Station
1 On the Second Station Setup screen navigate to Valves Per Station and press Next .
SETUP
Next
Master Valves
Weather Sensors
Station Setup
Flow Sensors
Advanced Station Settings
Done
Number of
Valves
STA 001
2
•
Setting the number of valves to 2 will not control them individually, it will only adjust the output voltage to
ensure both valves open.
4.3.5 Flow Sensors - Models only
A ow sensor is not required for the LXME2 controller, but it does add functionality by alerting you of
unexpected ow rates and even shutting down aected master valves or stations if ow rates exceed
set thresholds.