Current Section: Manual Watering 80
Navigation:
15.1.5 Manual MV Open
Occasionally it may be necessary to provide water to the system for unscheduled tasks. The Open
MV feature allows you to leverage settings, such as the maximum additional ow rate, from your MV
Water Window to open MVs for a short time.
Next
Start Station
Start Program
MV Water Window
Test All Stations
MV Water Window
Next
Set MV Water Window
Manual MV Open
Start
MV Open Duration
00:30
HH:MM
1 Turn the controller dial to Manual Watering
2 At the Manual Watering screen, press the key to select “MV Water Window”, then press
Next .
3 At the MV Water Window screen, press the key to select “Manual MV Open”, then press
Next .
4 The Manual MV Open screen appears, showing all MVs that were previously selected to
be included in the MV Water Window. Press Next .
5 At the Manual MV Open screen, press the and keys to set the duration (in hours and
minutes) for the MV to be open, then press Start.
•
Press and HOLD keys to accelerate settings.
6 The Conrmation screen appears.
To Next Page
Loading...
Need help?
General
