Rain Bird LXME2 User Manual

Current Section: Advanced Settings 75 Navigation:
Clear All Programs
Clear Programs
Next
Individual Programs
All Programs
Clear All Programs
NoYes
Are you sure? Press and hold
Yes to proceed.
1 Turn the controller dial to Advanced Settings
2 At the IQ / ADVANCED screen, press the key to select “Store/Recall Programs”, then press
Next .
3 At the Program Options screen, press the key to select “Clear Programs”, then press Next.
•
If the desired program is not selected, press the Program Select button to choose the desired program. See
“Program Select Button” for more details.
4 At the Clear Programs screen, press the key to select “All Programs”, then press Next .
5 A conrmation screen shows the process is complete.
14.1.2 Factory Defaults
Restore the LXME2 controller’s factory default settings.
IQ / ADVANCED
Next
Store/Recall Programs
Factory Defaults
Configure Cartridge
About this LX-ME2
Restore Factory Default
NoYes
Are you sure? Press and hold
Yes to proceed.
1 Turn the controller dial to Advanced Settings
2 At the IQ / ADVANCED screen, press the
key to select “Factory Defaults”, then press Next.
3 At the conrmation screen, press and HOLD the Yes key for 4 seconds to Restore Factory
Defaults. If you’re not sure, press No.
4 A conrmation screen shows the process is complete.

Rain Bird LXME2 Specifications

General

Brand	Rain Bird
Model	LXME2
Category	Controller
Language	English