Rain Bird LXME2 - View Station Flow Rates

Current Section: Flow Sensor 63 Navigation:
FloZone. You can view live ow rates if you have FloWatch™ setup see Current Flow Reading.
View Station Rates
View Flow Rates
Next
View Station Rates
View FloZone Rates
Done
View Station Rates
001 0000.0
User Entered
Station
FZ None
GPM
1 Turn the controller dial to Flow Sensor
2 At the FLOW SENSOR screen, with “Set Flow Rates” selected, press Next .
3 At the Set Flow Rates screen, press the key to select “View Flow Rates”, then press Next .
4 The View Flow Rates screen appears with “View Station Rates” selected; press Next.
5 At the View Station Rates screen, press the and keys to set the desired station
number. The FloZone for each station is shown below it. The normal ow rate for each
station will show to the right, and the source of the ow rate (Learned or User Entered)
shows below it.