NOTE:
•
Front tires will display on the image when the tires
are turned.
•
Due to wide angle cameras in mirrors, the image will
appear distorted.
•
Top View will show which doors are open.
•
Open front doors will cancel the outside image.
Top View Plus Rear View
This is the default view of the system in
REVERSE and is always paired with the Top
View of the vehicle with optional active
guidelines for the projected path when
enabled.
Rear Cross Path View
The Rear Cross Path will give the driver a
wider angle view of the Back Up Camera sys-
tem. The Top View will be disabled when this
is selected.
Top View Plus Front View
The Front View will show what is immediately
in front of the vehicle and is always paired
with the Top View of the vehicle.
Front Cross Path View
The Front Cross Path will give the driver a
wider angle view of the front camera system.
The Top View will be disabled when this is
selected.
Back Up Camera View
The Back Up Camera will provide a full
screen rear view with Zoom View.
NOTE:
If the Back Up Camera view was selected through the
Surround View Camera menu, exiting out of the Rear
View screen will return to the Surround View menu. If
the Back Up Camera was manually activated through
the Controls menu of the Uconnect system, exiting out
of the display screen will return to the Controls menu.
Cargo Camera
The Cargo Camera will provide a full screen
view of the cargo area.
NOTE:
If the Cargo Camera view was selected through the Sur-
round View screen, exiting out of the Cargo Camera
screen will return to the Surround View screen. If the
Cargo Camera was manually activated through the Con-
trols menu of the Uconnect display, exiting out of the
display screen will return to the Controls menu.
Trailer Reverse Guidance
The Trailer Reverse Guidance will pro-
vide a full screen view of the cargo area
and trailer.
Pressing the Left & Right Tow Mirror
Split Screen View button within the
Trailer Reverse Guidance screen will
display a split screen to allow the driver
to see both sides of the trailer at the
same time. This view allows the driver
to pan left/right to better frame the
trailer in the image.
NOTE:
Trailer Reverse Guidance can only be selected through
the Surround View screen; exiting out of the Trailer
Reverse Guidance screen will return to the Surround
View screen.
Zoom View
When the Rear View Camera image is being displayed,
and the vehicle speed is below 8 mph (13 km/h) while
in any gear, Zoom View is available. By pressing the
“magnifying glass” icon in the upper left of the display
screen, the image will zoom in to four times the stan-
dard view. Pressing the icon a second time will return
the view to the standard Back Up Camera display.
When Zoom View is selected while the vehicle is in
REVERSE, then shifted to DRIVE, the camera delay view
will display the standard Back Up Camera view. If the
vehicle is then returned to REVERSE gear from DRIVE,
the Zoom View selection will automatically resume.
ParkSense Camera View
148 STARTING AND OPERATING
To Next Page
Loading...
