Operation Quantron E 4
26
Entering the remaining fertiliser volume when refilling (not with weighing
spreader):
1. Switch from the Weighing-Tripcounter menu to the kg rest menu.
The remaining fertiliser volume from the last spreading process appears in
the display.
2. Fill the hopper.
3. Input the new total weight of fertiliser in the hopper. Confirm the input by pres-
sing the Enter key.
See also 4.9.2:
Input of values using the cursor keys, page 76.
The device calculates the values for the possible spread area and the pos-
sible spread distance.
4. Press the kg key once.
This returns you to the operating screen.
Calling up the remaining fertiliser volume during spreading:
During the spreading work, the remaining fertiliser volume is continuously recal-
culated and displayed.
You can switch to the kg rest menu during spreading, i.e with open slides, and
read the remaining weight in the hopper.
NOTICE
The values for application rate and working width cannot be changed in this
menu. They are for information only.
NOTICE
If you should wish to constantly observe the values during the spreading proce-
dure you can also assign the freely selectable display fields on the operating
screen with kg rest, ha rest or m rest, see section 4.8.2:
Display config.,
page 68.
To Next Page
Loading...