Operation Quantron E 4
62
4.7 Field data
In this menu you can create and save up to 200 operating data files.
Switch from the main menu to the Field Data menu.
Figure 4.28:Field file menu
4.7.1 Select field file
You can re-select a previously saved field file and proceed with this. The data al-
ready stored in the field file is not overwritten in doing so, but rather are added
to with the new values.
1. In the Field Data menu, select the
Select New File entry and press the Enter key.
The display shows the already saved operating data
sorted alphabetically
.
2. Select the desired field and press the Enter key.
The display shows the first page of the current field file.
To accept a field file, see 4.7.3:
Starting recording, page 63.
Submenu Meaning Description
Choose new file Selects a field file which is already saved. page 62
Create new file Creates a new field file. page 63
Erase file Deletes the highlighted field file.
Erase all files Deletes all saved operating data.
To Next Page
Loading...