Rauch quantron e - Creating a New Field File; Starting Recording

Operation Quantron E
63
4
4.7.2 Creating a new field file
1. In the Field data menu, select the
Create New File entry and press the Enter key.
 The display shows a window for entering the file name or a note.
Input of text into the operator panel is described in section 4.9.1:
Text input,
page 75.
2. Press the F4 (OK) function key to confirm the entry into the name field.
 The display shows the first page of the current field data.
 You can change the name of the field data by marking the second line.
4.7.3 Starting recording
1. Switch from the Field data menu to the current field file.
Figure 4.29:Displaying the field data
[1] Display of remaining free memory locations
[2] Field for starting recording
[3] Name field
[4] Value fields
[5] Display of the page number
[6] Display of the start time/date
[7] Display of the stop time/date
[8] Field for deleting the data of the current field data
NOTICE
The name is limited to 40 characters.
5
7
6
8
1
2
3
4