Operation Quantron E 4
34
How to select a submenu:
1. Highlight the submenu with the black bar in the display. The highlight bar can
be moved up and down with the arrow keys.
2. Open the highlighted submenu with the Enter key.
4.4.1 Application rate
In this menu you can enter the desired target value for the application rate.
Figure 4.10:Appl.rate menu
Input application rate:
1. Switch from the Fertiliser settings menu to the Application Rate menu.
The display shows the currently specified application rate.
2. Input the new value in the input field with the arrow keys:
Arrow up: Value increases.
Arrow down: Value decreases.
Arrow to the left/right: Cursor moves to the left/right.
See also 4.9.2:
Input of values using the cursor keys, page 76.
3. Confirm the input by pressing the Enter key.
The new value is saved in the operator panel.
4. Press the ESC key to return to the previous menu
or
Press the Menu key to return to the Operating Screen.
NOTICE
Not all parameters are shown simultaneously in one operating screen. You can
jump to the adjacent operating screen with the arrow keys.
To Next Page
Loading...