Operation Quantron E 4
44
4.4.6 Fertiliser chart
You can create and manage fertiliser charts in this menu.
Create new Private Fertiliser Chart
You have the option of creating up to 60 Private Fertiliser Charts in the control
unit.
1. Switch from the Fertiliser settings menu to the Fertiliser chart menu.
The display shows the number of existing fertiliser charts.
Figure 4.19:Display of existing fertiliser charts (private)
[1] Number of the private table/Number of stored tables
[2] Name field
[3] Working table
[4] Private table
[5] Delete the displayed private table
2. Push the F4 button (working table)
A new table with an empty name is created.
In the display the number of existing tables increases.
3. Highlight the (empty) Name Field.
4. Press the Enter key.
The Fertiliser Settings menu is displayed again.
5. Press the Enter key.
The Fertiliser name menu is displayed.
6. Enter the name of fertiliser chart by using the navigation keys and the enter
key.
Input of text into the operator panel is described in section 4.9.1:
Text input,
page 75.
NOTICE
The selection of a fertiliser chart has an effect on the fertiliser settings, the con-
trol unit and the fertiliser spreader. The setting of the application rate remains
unaffected.
2
1
4
5
3
To Next Page
Loading...