Rauch quantron e - Remaining Fertiliser Volume

Operation Quantron E
25
4
4.2.2 Remaining fertiliser volume
In the kg rest menu, you can call up the remaining fertiliser volume in the hop-
per.
The menu shows the possible area (ha) and distance (m) that can be spread
with the remaining fertiliser volume. Both displays are calculated based on the fol-
lowing values:
 Fertiliser settings
- Application rate
- Working width
Figure 4.4: kg rest menu
[1] Remaining fertiliser input field (in the case of the weighing spreader only the display
field of the actual remaining fertiliser volume)
[2] Application rate (display field from fertiliser settings)
[3] Working width (display field from fertiliser settings)
[4] Display of area that potentially can be spread with the remaining weight of fertiliser
[5] Display of possible distance that can be spread with the remaining weight of fertiliser
NOTICE
The current load weight can only be determined in the weighing spreader by
weighing. In all other spreaders the remaining fertiliser volume is calculated
from the fertiliser and machine settings and from the travelling signal and the in-
put of the filling volume must be made manually.