Operation Quantron E
27
4
4.2.3 Weigh quantity
In this menu you can weigh the fertiliser volume contained in the hopper and set
the parameters for controlling the flow factor.
Figure 4.5: Weigh quantity menu
[1] Weighed volume in the hopper
[2] Filling options
[3] Weigh remnant (only displayed for the operating mode Auto km/h + Stat. kg)
[4] Quit
The menu shows the remaining fertiliser volume in the hopper. This volume de-
pends on the following values:
Menu item Weigh quantity
Menu item Machine tare
NOTICE
The Weigh Quantity function can only be requested if the fertiliser spreader
being used is an AXIS W.
NOTICE
The function Volume quantity can only be confirmed when the machine is at a
standstill.
NOTICE
The Weigh quantity function is only effective if the system is using either the
Auto km/h + Auto kg or Auto km/h + Stat. kg operating modes.
For the control unit delivered with the AXIS W fertiliser spreader, the Auto km/h
+ Auto kg operating mode is preselected as standard at the factory.
To Next Page
Loading...