Rauch quantron e - Hopper Configuration and Speed Calibration

Operation Quantron E 4
46
4.5 Hopper configuration
You make the settings for the tractor and the fertiliser spreader in this menu.
 Switch from the main menu to the Hopper configuration menu.
Figure 4.20:Hopper configuration menu
How to select a submenu:
1. Highlight the submenu with the black bar in the display. The highlight bar can
be moved up and down with the arrow keys.
2. Open the highlighted submenu with the Enter key.
Submenu Meaning Description
Tractor (km/h) Determination or calibration of the speed
signal.
page 47
AUTO / MAN mode Determination of the operating mode au-
tomatic or manual.
page 50
+/- appl. rate Pre-setting of the volume reduction for
the different spreading types.
page 59
Curve correction Input of a correction value in order to
maintain the spreading volume when the-
re are different mass flows.
page 59