User instructions
3
1
1 User instructions
1.1 About this operator manual
This operator manual is a component of the control unit Quantron E.
The operator manual contains important instructions for the safe, correct and
economical operation and maintenance of the control unit. Your attention will
help to prevent dangers, reduce repair costs and downtime and will increase
the reliability and service life of the machine.
The operator manual is a component of the machine. All documentation must be
kept within reach at the place of operation of the control unit (e. g. in the tractor).
The operator manual is not intended to replace your own personal responsibil-
ity as the owner and operator of the control units Quantron E.
Brief instructions are supplied with the control unit Quantron E. If these are not
included in the scope of supply please contact us.
1.2 Information on layout
1.2.1 Meaning of safety precautions
In the operator manual, the safety precautions are classified according to how se-
rious the danger is and the probability of its occurrence.
The warning symbols draw attention to the unavoidable residual risks inherent in
the design to which users of the control unit are exposed. The safety instructions
used are structured as follows:
Example
Signal word
Symbol Explanation
n DANGER
Description of sources of danger
Description of the danger and possible consequences.
Ignoring this warning will result in very serious injury or death.
Measures to prevent this danger.