Rauch quantron e - Stopping Recording; Importing and Exporting Operating Data

Operation Quantron E
65
4
4.7.4 Stopping recording
1. Switch from the Field data menu to the current field data.
2. In the current field data select the Field data stop field and press the Enter
key.
 The recording is stopped.
 The Field data stop display changes to Field data start.
3. Press the ESC key to return to the previous menu
or
Press the Menu key to return to the Operating Screen.
4.7.5 Importing and exporting operating data
The control unit Quantron E enables the operating data recorded to be imported
or exported.
 See 4.8.4: Data transmission, page 71.