Operation Quantron E
35
4
4.4.2 Working width
You can set the working width (in metres) in this menu.
Figure 4.11:Working width menu
Entering the working width:
1. Switch from the Fertiliser settings menu to the Working Width menu
The working width currently set appears on the display.
2. Input the new value in the input field with the arrow keys:
Arrow up: Value increases.
Arrow down: Value decreases.
Arrow to the left/right: Cursor moves to the left/right.
3. Confirm the input by pressing the Enter key.
The new value is saved in the operator panel.
4. Press the ESC key to return to the previous menu
or
Press the Menu key to return to the Operating Screen.
To Next Page
Loading...
Need help?
General