Operation Quantron E
39
4
Figure 4.14:Working speed menu
4. Confirm the input by pressing the Enter key.
The new value is saved in the operator panel.
The Prepare calibration test screen opens.
Figure 4.15:Prepare calibration test screen
[1] Icon above function key F4 to select right spreading side
[2] Icon above function key F1 to select left spreading side
[3] Display of part width
Select part width:
1. Set the spreading side on which you wish to conduct the calibration test.
Press function key F1 to select the spreading side left or
Press function key F4 to select the spreading side right.
The symbol of the selected spreader side has a black background.
To Next Page
Loading...